HVAC & DISTRICT COOLING

HVAC pumps.
For Thailand.

HVAC pumps for chilled-water and condenser-water circulation, central air conditioning and district cooling in Thailand. Compare horizontal split-case, vertical, end-suction and inline configurations against your operating range.

Discuss your HVAC duty Open HVAC brochure

Pumpsense pumps installed in an HVAC plant room

AIR-CONDITIONING PUMPS

Match the layout.
Match the demand.

The ranges below follow the supplied Thailand HVAC brochure. For broader industrial ranges, see the separate Water Pumps page.

HS SERIES

Horizontal split-case HVAC pumps

A split-case configuration for circulation duties in central air conditioning and district cooling installations.

Brochure flow: Up to 2,500 m³/h
Brochure head: Up to 80 m
Brochure speed: Up to 1,800 rpm

Double-entry split-case range with stable H-Q characteristics
Packed gland and mechanical seal options
Suction and discharge orientations to suit the project

Source: HVAC brochure, pp. 6-7.

Enquire about this range Range charts

HSV / VERTICAL CONFIGURATIONS

Vertical split-case HVAC pumps

Vertical execution within the split-case family for projects where orientation and available floor space are important selection inputs.

Reference range: Split-case HVAC envelope
Configurations: Vertical shaft arrangements
Selection basis: Model and installation specific

Same brochure family coverage as HS, subject to model selection
Alternative suction and discharge orientations
Review working pressure, motor access and maintenance clearance

Source: HVAC brochure, pp. 6 and 13-15.

Enquire about this range Configuration examples

ES / ESL SERIES

End-suction HVAC pumps

End-suction options for HVAC services, including smaller ISO 2858 / ISO 5199 designs and the large end-suction range.

Brochure flow: Up to 1,100 m³/h
Brochure head: Up to 120 m
Brochure speed: Up to 1,800 rpm

Packed gland and mechanical seal fitted variants
Material and flange options
Vertical and strengthened-bearing configurations where selected

Source: HVAC brochure, pp. 8-9.

Enquire about this range Range charts

IL SERIES

Vertical inline pumps

Inline suction and discharge connections simplify the piping layout. The brochure describes an independent thrust bearing and flexible coupling to the motor.

Brochure flow reference: 2,500 m³/h
Brochure head reference: 20 m
Brochure speed: Up to 1,800 rpm

Compact footprint with inline connections
Packed gland or mechanical seal configurations
Material options include CI, DI, bronze, stainless steel and Ni Resist

Source: HVAC brochure, pp. 10-11.

Enquire about this range Inline range chart

COMPACT SPLIT-CASE / CSC

An additional compact option

Pumpsense India also lists CSC pumps for air conditioning, water supply and industrial cooling. Standard, high-pressure and vertical executions are described, with packed gland variants available.

Source: Pumpsense India CSC reference page.

See CSC and the broader range

Pumpsense personnel checking a blue split-case pump — Manufacturer performance testing · HVAC brochure

DESIGN & PERFORMANCE

Look beyond
the design point.

The HVAC brochure emphasises hydraulic efficiency over the preferred operating range, not only at a single nominal duty.

It describes CFD-supported hydraulic design and attention to leakage, disc-friction and mechanical losses. Efficiency verification is described with reference to HI-40.6 in the manufacturer test laboratory.

Define the actual duty range and operating hours
Review high suction or casing working-pressure requirements
Consider available space and the required flange orientation
Discuss retrofit or replacement constraints before selection

Source: HVAC brochure, pp. 5, 13 and 17-19.

RANGE CHART LIBRARY

Keep the original
performance information.

Open the brochure at the relevant pages. Use the original PDF for readable curves and model identification.

HS / HSV split-case

50 Hz and 60 Hz range charts

Open brochure page 7

ES / ESL end-suction

50 Hz and 60 Hz range charts

Open brochure page 9

IL vertical inline

Inline range chart and selection note

Open brochure page 11

PREPARE YOUR ENQUIRY

A better starting point
for pump selection.

Include the hydraulic duty and the installation conditions. Working pressure, liquid temperature and available space are important parts of the enquiry.

Hydraulic requirements

Required flow, differential head, expected operating range, liquid composition and temperature.

Mechanical arrangement

Horizontal or vertical layout, suction pressure, casing pressure requirement, flange standard, seal and material needs.

Drive & project scope

50 or 60 Hz, motor supply, any variable-speed requirement, quantity, drawings and the planned installation date.

YOUR NEXT PROJECT

Make circulation work for your building.

Share the application and operating range for an HVAC pump discussion.

Send an inquiry